Maintenance and Inspection of the Accumulation Tank

An accumulation tank is an essential part of a heating system that helps store heat and ensure the system operates smoothly. Like any technical device, a storage tank requires regular maintenance and inspection to ensure its safety and a long service life.

Maintenance work may only be performed by a qualified specialist

Maintenance, repair, and inspection work on the storage tank may only be performed by a specialist with the appropriate training and qualifications. Since the system operates under pressure and is connected to the heating system and often to electrical equipment as well, improper procedures may cause damage to the equipment or endanger people’s safety.

Before performing maintenance, the system must be made safe

Before beginning any maintenance or inspection work, make sure that:

• the system is turned off;
• the tank has cooled down;
• there is no pressure in the system;
• all connected electrical devices are turned off;
• the accumulation tank has been completely emptied.

Failure to follow these instructions may result in burns, leaks, or other hazardous situations.

Check the accumulation tank at least twice a year

The condition of the accumulation tank should be visually inspected at least every six months.

During the inspection, it is worth paying attention to the following characteristics:

• corrosion or rust;
• leaks at connection points;
• visible deformations or damage;
• status of isolation;
• unusual marks on the surface of the tank or on the connections.

Regular inspections help identify potential problems before they cause major malfunctions or system downtime.

Components operating under pressure must not be repaired on your own

The accumulation tank contains components that operate continuously under pressure. If any pressure-bearing part is no longer in working order or if there is any doubt about its condition, the tank must be replaced with a new one.

For safety reasons, damaged pressure components must not be used or repaired on your own.

Who is responsible for the security of the system?

The manufacturer of the accumulation tank is responsible for the quality of the equipment in accordance with the manufacturer’s instructions. At the same time, the safety of the system depends to a large extent on whether the tank has been properly selected, installed, and maintained.

Problems may arise, for example, if:

• an accumulation tank that is not compatible with the system is selected;
• Mistakes are made during installation;
• maintenance work is performed incorrectly;
• there are malfunctions in the heating system that affect the operation of the tank;
• The instructions for use and maintenance are not being followed.

Regular maintenance extends the tank’s service life

An accumulation tank is an investment that, with proper maintenance, can last for years. Regular inspections, professional maintenance, and following the manufacturer’s instructions help ensure the system’s safety, reliability, and the longest possible service life.

Standardmõõdus akupaake leiad alati laost