{"id":19000,"date":"2026-07-07T07:31:26","date_gmt":"2026-07-07T04:31:26","guid":{"rendered":"https:\/\/mindreksmetall.ee\/what-should-you-keep-in-mind-when-using-an-accumulation-tank\/"},"modified":"2026-08-03T12:29:12","modified_gmt":"2026-08-03T09:29:12","slug":"what-should-you-keep-in-mind-when-using-an-accumulator-tank","status":"publish","type":"post","link":"https:\/\/mindreksmetall.ee\/en\/what-should-you-keep-in-mind-when-using-an-accumulator-tank\/","title":{"rendered":"What should you keep in mind when using an accumulator tank?"},"content":{"rendered":"\n

The accumulator tank operates under pressure. The selection, installation, and maintenance of the tank must be carried out by qualified specialists who follow the manufacturer\u2019s instructions, the system design, and local requirements. Here are the key points to keep in mind when using an accumulator tank.<\/p>\n\n\n

Follow the technical specifications for the accumulator tank<\/strong><\/h3>\n\n\n

The accumulator tank’s product label lists its capacity, maximum allowable operating pressure, and operating temperature. The system’s pressure and temperature must remain within these limits.<\/p>\n\n\n\n

The accumulator tank’s serial number is located near the metal MI logo. It is required for technical inquiries, warranty claims, and tank identification. The product label must remain intact and legible.<\/p>\n\n\n\n

Use appropriate protective equipment<\/strong><\/h3>\n\n\n\n

The system must be equipped with a pressure-limiting safety valve. Its opening pressure must be equal to or lower than the maximum allowable pressure indicated on the tank’s product label. <\/p>\n\n\n\n

The temperature of the water in the accumulator tank must remain below 90 \u00b0C, and the system must be protected against overpressure.<\/p>\n\n\n

Protect the accumulator tank from corrosion and freezing<\/strong><\/h3>\n\n\n

To reduce the risk of corrosion, the system must be properly grounded. The combined effects of the water\u2019s properties, oxygen content, dissolved salts, and the various metals used in the system must also be taken into account. <\/p>\n\n\n\n

The tank and piping must be protected against freezing. With a suitable antifreeze fluid, the tank can be used at temperatures as low as \u201310 \u00b0C. When selecting and handling the fluid, follow its safety and environmental requirements. <\/p>\n\n\n\n

Use only suitable fluids<\/strong><\/h3>\n\n\n\n

The accumulator tank is designed for use with liquids that are suitable and safe for the heating system. The water must be clean and free of sand, clay, or other solid particles.<\/p>\n\n\n\n

Chemicals, solvents, petroleum products, acids, bases, and substances that pose a fire, explosion, or poisoning hazard can damage the tank and make its use dangerous.<\/p>\n\n\n\n

Choose a suitable installation location<\/strong><\/h3>\n\n\n\n

The accumulator must be installed on a stable base in a location where drainage is also possible. There must be sufficient space around the tank, piping, and connections to allow for inspection, maintenance, and replacement of parts.<\/p>\n\n\n\n

If there is a risk of vibration, use appropriate insulation or mounting.<\/p>\n\n\n\n

Check the accumulation tank regularly<\/strong><\/h3>\n\n\n\n

It is a good idea to check the condition of the tank at least every six months. Pay attention to the following: <\/p>\n\n\n\n